Product Origin:
ChinaItem NO.:
Generator Speed Governor EG3000 Engine Speed ControllerThe EG3000 is a universal generator governor / engine speed controller equipped with Smoke Limiting, & Idle Speed. Suitable for diesel, gas and natural gas engines with Built-in & Non-Built-in PTs Pumps, also can be used with Low Current, Electric over Hydraulic Oil Pumps Type Governor Actuators
Features of EG3000
1. Works on a wide ranges of MPU/flywheel frequencies
2. 15 Amp Max output
3. Suitable for all types of diesel and gas engines
4. High sensitivity and stable at low frequency variations Moisture, vibration, and rust protected, epoxy encapsulated electronics
5. For use with isochronous generators & automatic paralleling PLC controls
6. Idle speed adjustment and connections for a remote speed POT
|
Operating Voltage |
12 or 24 VDC ±20% |
|
Output Current |
0.5 ~ 15 A |
|
Run Speed Adjustment range |
Speed adjustment Potentiometer (30 turn); 4 Segment Dip |
|
Idle Speed Adjustment Range |
Run Speed 30 ~ 85% |
|
Ramp Time |
3 ~ 20 Sec |
|
Remote Speed Pot |
Ext. Remote speed pot terminal 6, 7, 8 (ILS) and 6, 7, 9 |
|
Temp. Stability |
<0.01% |
|
Run Speed Stability |
± 0.25 % at steady state |
|
MPU input signal |
1 ~ 120VAC RMS |
|
Drop |
4.00% |
|
Adjustment |
Run Speed, Idle Speed, Ramp Time, Droop, Integration, Gain |
|
Mechanical Vibration |
1G @ 18 ~ 30 Hz, 2.5G @ 48 ~ 70 Hz |
|
Relative Humidity |
< 95% |
|
Operating Temperature |
-40 °C~ 85°C |
|
Storage Temperature |
-40 °C~ 85°C |
|
Dimensions |
147mm L * 114mm W * 50mm H |
|
Weight |
690g ± 2% |
If you have inquiry, please leave us a message, we will reply you as soon as we can!
pt
ar
ko
