Product Origin:
ChinaItem NO.:
24V DC Generator Electronic Speed Governor Control Unit EFC 3044195
1)Spec
Rpm stability: <±0.25%
Speed range: 1KHz ~ 6.5KHz
Thermal stability: Max±0.7%
Idle regulation: 260±20Hz
Droop regulation: Minimum 15Hz±6Hz/ 1 amp
Maximum: 400Hz±75Hz/ 1 amp
External speed regulation:±200Hz (with 1 k?Connected)
Aux input sensitivity: 148Hz / 1v.,±10Hz
Impedance: 1m?
Working temp range: -40 ~ 85
2)Environment:
Working humidity range: Maximum 95%
Stocking temp: -55 ~ 92
Shocking: 20-100Hz 500mm/sec.
Input power supply
Voltage: 24v
Grounding pole: Negative pole
Power supply: 40ma
Actuator continuous current: Minimum 1a, maximum 4.5a
3)MPU
Signal: 2 ~ 120v RMS
Note: Above-mentioned parameters are tested with a 3800Hz working frequency.
3044195 |
||
Input |
Supply |
24 VDC ±20% |
Polarity |
Negative Ground (Case Isolated) |
|
Power Consumption |
40 MA |
|
Maximum Actuator Current |
4.5 A continuous |
|
Speed Sensor Signal |
2-120 Volts RMS |
|
Performance |
Isochronous Operation/Steady State Stability |
±0.25% or better |
Speed Range/Governor |
1K to 6.5K Hz continuous |
|
Speed Drift with Temperature |
±1 Max |
|
Idle Regulation |
260±20 Hz |
|
Droop Adj. Max. |
400 Hz., ±75Hz. Per 1.0A change |
|
Speed Trim Range |
±200 Hz with 1 ohm connected |
|
Remote Variable Speed Range |
25 to 100% of rated speed |
|
Impedance |
1m ohms |
|
Environmental |
Ambient Operating Temperature Range |
-40 to +85 Deg. C |
Relative Humidity |
Up to 95% |
|
All Surface Finishes |
Fungus Proof and Corrosion Resitant |
|
Reliability |
Vibration |
20 to 100 Hz. 500mm/sec |
If you have inquiry, please leave us a message, we will reply you as soon as we can!